|
|
Post by shrimpeater on Oct 28, 2022 1:27:52 GMT
Is there a troubleshooting manuel out there?
Have a rescue that I'm working on. I can put in a selection,but write in stops at selection and that's it. No coil fires.No seletion made. Wobble plate apparently doesn't work either.Might need adjusting. I can manuelly make a selection by moving a pin,and nothing happens.
|
|
|
|
Post by jukenorman on Oct 28, 2022 8:27:32 GMT
Yes troubleshooting is covered in the manual in a series of shem-a-grams which show the "hot" circuits - so for example, for your write-in problem you would be looking at sequence 9 or maybe 10 to fault find. The fact that you also cannot get the read-out to operate by manually selecting a pin (coupled with your write-in issues) would make me suspect that you have lost the -28VDC so I would look at that first. We have been over these types of problems before more than once so it's also worth looking back at previous threads.
Norman.
|
|
|
|
Post by shrimpeater on Oct 28, 2022 16:50:29 GMT
Thank you. That is a big help.I'll go back at it by checking the -28vdc.
I appreciate your answer
|
|
