Post by tvtechrich on Dec 20, 2022 21:39:41 GMT
I have a M100a with a WICO 45 conversion. Got it all working but have leftover parts I can't figure out. There is a chrome piece that is about 1 1/4 inches wide, six in. long like a channel. Curved like the edge of a record. Has a 3in by 3/4 in bracket at a right angle on 1 side with a beveled hole for a mounting screw near the outer end. Almost looks like it could mount over the top of the plastic mech cover. but only 1 screw.
Other part is 3 sides of a box, with 2 mounting holes spaced the same as the stylus brush mounting holes in the plastic mech covers. Don't know how it would have fastened, as I lost the little bolts that held the brushes on. Picture in manual shows the brushes mount on a fork that straddles the record but mine bolt directly on mech cover. I suppose it changed when it adapted to 45s. A picture would help I know but I can't seem to get them posted.
Other part is 3 sides of a box, with 2 mounting holes spaced the same as the stylus brush mounting holes in the plastic mech covers. Don't know how it would have fastened, as I lost the little bolts that held the brushes on. Picture in manual shows the brushes mount on a fork that straddles the record but mine bolt directly on mech cover. I suppose it changed when it adapted to 45s. A picture would help I know but I can't seem to get them posted.
