|
|
Post by jacknova on Aug 25, 2023 21:40:09 GMT
Greeting everyone. I have a Selector assembly 100SA5-L6, the service manual does not show it only the 100SA3. I have a problem with the selector pins not being reset only on one side , the other side is OK. When the relay tries to reset the pins on the bad side the plunger does not come out to do it's job. Appears to be a bad coil. I would like to find one to replace but I need the part number which is not in the service manual for the 100SA5-L6. Any help would be appreciated
Thank you
|
|
|
|
Post by jukeboxmarty on Aug 26, 2023 2:16:03 GMT
I'm assuming you have a model M100B or BL.
The cancel coil is not part of the Selector Assembly (pin bank). It's part of the Contact Block that rides underneath the Selector Assembly.
Regardless, the Contact Block breakdown is shown on the same page as the Selector Assembly.
The parts numbers shown on the 100SA3 page should be valid for your machine.
How do you know the coil is burnt out? Is it visibly burnt? Did you measure the resistance?
Many times the cancel coil plunger just gets stuck and needs cleaning.
|
|
|
|
Post by jacknova on Aug 26, 2023 10:51:46 GMT
Thank you will double check, it appears burnt,will measure today.
Coil really burnt and open. I will try to find a replacement part for it.
Thank you
|
|
