|
Post by programj on Nov 3, 2023 20:40:01 GMT
Hi I have a Seeburg Lpc1 I've been working on. Ive read the service manual, parts manual, and probably 1000 threads on here and other places. I've lubed everything with the proper lube. Cleaned the contacts on motor and the power relay in the auto speed unit. I put the condensor and the cap kit in the unit. I also replaced the pot switch in it. Everything was humming along. It was playing 45s and 33 1/3 wonderfully. All selectors and literally everything working as it should. All tubes replaced. Then I went to turn it on and it stopped playing 45s.The power relay won't energize. I know it's a no no... but when I hold the relay closed with a toothpick it speeds up and sounds great again. I'm at a loss on what to do. Any help would be greatly appreciated. This is my first jukebox. My dad had one when I was little and knew it inside and out. He passed away and so did my repair man. Thank you!
Jake
|
|
|
Post by jukeboxmarty on Nov 3, 2023 20:46:58 GMT
You need to check contact 'P' of the mechanism's 'cam switch' and contact 'S' of the mechanism's 'clamp arm switch'.
|
|