SB fuse on 100 mechanism

[stevend]

HI. 

After reading Ron Rich's Mechanism Guide, I decided to go ahead and put the fuse in the leg to the pin cancel and pop solenoid for the 100B I am doing for my son...I asked where peoiple usually put it, as there is not a bunch of space on the mech...Ideas? 

Thanks!

PS..Ron answered that he mounts the fuse clip to the allen head on the left of the switch plate that held the .01 cap...Rather than ask him directly, I though I could ask it here...I know of no 0.01 cap on the mechanism..

I am sure there is an easy answer here...Thanks!!

[Ron Rich]

Steve,
Sure there's an easy answer--Same as always--RTFM !
See page 29 in the new "Seeburg Mechanism Guide" you just purchased-(thank-you)- You will find a drawing of the 100 mech you have--that cap is drawn in at the left of the motor terminal block--It SHOULD be gone !
BTW-- Do not fuse the leg with the pop meter on it--separate/fuse the cancel coil circuit, only -- Ron Rich