|
|
Post by fwdstuck on Nov 9, 2018 1:27:37 GMT
I've having sound vibrations from the mechanism at the beginning of the record. So I've replaced all the rubber parts in the motor. Now the vibration is even worse now. If sounds like its playing through a hollow tube.
|
|
|
|
Post by Ron Rich on Nov 9, 2018 13:09:49 GMT
Please read, and comply with our "rules" in the introduction section-- What are "all" the rubber parts -- and did you install them correctly ?
Which brand motor is in that phono ?
Ron Rich |
|
|
|
Post by fwdstuck on Nov 9, 2018 22:33:57 GMT
I've replaced both motor rubber rings. The rubber shaft and the rubber piece the motor sits on. The motor is a general electric band.
|
|
|
|
Post by Ron Rich on Nov 10, 2018 0:17:54 GMT
Are you sure--Never have seen Seeburg use a GE motor ? Is the coupler installed so that ALL play is removed-- Is that a NEW, coupler ?
Ron Rich
|
|
