|
Post by dukester on Dec 19, 2018 20:19:37 GMT
Is their a way to send you a video of what it's doing?
|
|
|
Post by Ron Rich on Dec 19, 2018 22:32:00 GMT
Dukster, The coin switch fuse is located on the Pricing unit, in all-most all cases--It is correct -- Open the pricing unit and post a photo of it-- Ron Rich
|
|
|
Post by dukester on Dec 19, 2018 23:50:15 GMT
|
|
|
Post by Ron Rich on Dec 19, 2018 23:55:21 GMT
OK--watch it when you make a selection--does the "plunger' shown in the center photo move down and push on the nylon wheel ? When you stick a coin in, does that nylon wheel advance ? Ron Rich
|
|
|
Post by dukester on Dec 19, 2018 23:59:20 GMT
Ron, Please see attached marked photo. The black arrow is pointing to a black pin that engages the gear everytime a coin is inserted or free play is pressed. The gear will advance until it stops, but doesn't reset or seems to do anything else but move the gear. I have gently moved the gear but still, nothing happens.
|
|
|
Post by Ron Rich on Dec 20, 2018 0:17:35 GMT
Dukester, I called that pin, a "plunger" -- I am assuming that the pin is the subtract plunger. Can you turn that gear in both directions, or only one ? If only one--turn it all the way till it stops. Then add a quarter and watch for a switch movement, as the wheel moves--that should be your "credit switch" Check it for "dirt/adjustment--see your manual ! Ron Rich
|
|
|
Post by dukester on Dec 20, 2018 0:19:05 GMT
Ron, Ok, I will try that and get back with you. Really appreciate your help!
|
|
|
Post by dukester on Dec 20, 2018 1:14:35 GMT
Ron, I figured which is the credit switch is but it is not happening when the coin is inserted. I clicked the switch myself and it gave me a credit or "select" but I wasn't able to select anything. In other words, the "select" light is on but nobody's home My manual does not cover my pricing unit but shows a much more simpler version. Looks nothing like mine.
|
|
|
Post by Ron Rich on Dec 20, 2018 3:56:58 GMT
Dukester, I have never seen that pricing unit before either ? Sorry, I don't know where to go from here ?? Perhaps--if you have a "copy" manual, you can contact some of the suppliers listed in our FAQ's section, and see if they have a manual for that pricing unit ? Ron Rich
|
|
|
Post by dukester on Dec 20, 2018 17:43:52 GMT
Ron, Ok, will do. Thanks so much for your time. Have a Merry Christmas! Dukester
|
|