rene
New Member
Posts: 2
|
Post by rene on Feb 6, 2019 21:41:38 GMT
Hear a clunk then it stopped turning although, not even in the scan position. If I put a quarter in and make a selection the selection wheel WAS turning and turning and not going on to the next step. I read the service manual, scoured to web and tinkered, hoping it was just not completely the circuit. Now I put a quarter in and it does nothing at all.... totally screwed. It worked when I bought it and when I got it home, for about three records... any help would be appreciated
|
|
|
|
Post by Ron Rich on Feb 6, 2019 23:31:54 GMT
Hi Rene,
Do you have the Service/parts Manual ? If so, check the cam follower that operates the side A/B switch. Sounds as if it's jammed due to lack of proper lubrication. If you do not have the manuals, go to our FAQ's section and order it from one of the listed suppliers. Un-plug that machine until you at least check the fuses or circuit breakers. If fuses be sure they are the correct type/size ! Ron Rich
|
|
rene
New Member
Posts: 2
|
Post by rene on Feb 7, 2019 10:53:43 GMT
Yes I have the manual I will check that later today. Any ideas however as to why it would stop working altogether? When I put coins in the lights do not even light up to show I have selection available nor will it do anything at all
|
|
|
|
Post by Ron Rich on Feb 7, 2019 13:39:18 GMT
Hi Rene,
if the coin is going all the way into the cashbox, and giving no credit, I would guess a fuse has blown --- Ron Rich
|
|
