Post by mississippiman on Apr 8, 2024 2:44:59 GMT
I am a A/V installer and have a request from a Customer from 33 yrs ago. I installed a 4 room Home Stereo Audio system and used the Amp Output from a Rowe Bubbler Stereo unit. (150 watt amp / 45s only). I had no issues back then taking a speaker Level connections at the spkr / transforer outputs. ( I was young then and very determined 😊)
Now after all this time they want to make the Rowe a "Stand Alone" unit and drive the Home with a new Receiver.
So....I suggested taking a Line Level out into a Bluetooth Transmitter / Receiver so they can send 45 record audio to the House Receiver as well as steam music from phone sources. Or send a Bluetooth input directly into the Juke.
I located the Line In/Out pins on the Amp, but the Service Manual offers no schematic on the layout. I am very reluctant to proceed without a wiring schematic. I was hoping there may be a source for the original Multi-Pin connector or at least a schematic for reference
I can post some photos and a copy of the page showing the Rowe's amp.
Any help would be absolutely appreciated!
Now after all this time they want to make the Rowe a "Stand Alone" unit and drive the Home with a new Receiver.
So....I suggested taking a Line Level out into a Bluetooth Transmitter / Receiver so they can send 45 record audio to the House Receiver as well as steam music from phone sources. Or send a Bluetooth input directly into the Juke.
I located the Line In/Out pins on the Amp, but the Service Manual offers no schematic on the layout. I am very reluctant to proceed without a wiring schematic. I was hoping there may be a source for the original Multi-Pin connector or at least a schematic for reference
I can post some photos and a copy of the page showing the Rowe's amp.
Any help would be absolutely appreciated!