|
|
Post by holytrain on Oct 14, 2020 21:44:21 GMT
Thanks Ron I'll check it out this weekend and let you know how it worked.
|
|
|
|
Post by holytrain on Oct 29, 2020 21:30:22 GMT
Ron was able to work on the wurlitzer toady got it going with jumpering the pins. My only question is how will that affect the latching coil. So, it will be energized all the time. Will this cause it to burn out in time or should I install a switch to turn it off when not selecting records or just don't worry about it. Had one burn out on a seeburg one time and it stunk to high heaven. Don't wish that on anyone. Thanks as always for your help
Rich
|
|
|
|
Post by Ron Rich on Oct 30, 2020 0:19:08 GMT
Hi Rich,
The coil on the WurliTzer, unlike the solenoid on the Seeburg is rated as a "constant duty device"-- IF -- the resistor is, in fact added in series with it. I have heard of, but never seen, a coil "burn up"-- I have also seen others advise changing that resistor from a 5 to 10 watt unit. Ron Rich
|
|
|
|
Post by holytrain on Oct 30, 2020 2:17:41 GMT
Thanks Ron. Makes my job a lot easier
Rich
|
|
