|
|
Post by Ron Rich on May 13, 2019 1:37:51 GMT
Hi All,
"Pipster3" out of Canada, has just built a new replacement cartridge holder, for all wedge carts. used on Seeburgs from the SS-160, model on up.
He sells it on eBay--It is defective on most models, and should be replaced. The original is brittle, and the retainer in the rear, or the one in front, is subject to breaking off,
Many are taped on--- if yours is that way, I suggest changing it ! Ron Rich
|
|
|
|
Post by jakedaniel on May 13, 2019 20:40:04 GMT
He’s only selling them in pairs. I only need one, so if anyone wants to go halves with me on a pair and we each keep one, just let me know.
|
|
tonyj
Junior Member
Jukebox Newbie
Posts: 93 
|
Post by tonyj on May 13, 2019 20:44:07 GMT
I'll go in on halves - I think the one in my SPS has seen better days
|
|
|
|
Post by jakedaniel on May 13, 2019 20:55:01 GMT
I'll go in on halves - I think the one in my SPS has seen better days Cool! Just got your PM. |
|
|
|
Post by Ron Rich on May 13, 2019 23:56:21 GMT
Guyz,
Forewarning !! When you do this DO NOT "MESS WITH" the tone arm wire path, under the tone arm--It is probably "set in it's ways", and will NOT like being changed ! Splice on "up top" if you need to, or use all new wire -- Ron Rich
|
|
|
|
Post by jakedaniel on May 15, 2019 12:11:36 GMT
I’m swapping in a later tonearm cradle and am going to replace the tonearm wiring beforehand. One less thing to go wrong. Same with this little plastic clip. The one on this tonearm I’ve got isn’t broken but since it’s a known trouble spot I’d rather replace it before I do the swap than afterwards.
|
|
