|
|
Post by juju504 on May 14, 2019 19:46:53 GMT
I bought a 1976 Seeburg std3 from a old bar and someone had remove the volume pot and wired it to play full blast all the time. I bought a new 25K stereo pot and now I have no clue to how to wire this pot. Could someone please post a photo of the wiring harness going to the volume pot so that I can wire mine please. And seeburg std series will work
|
|
|
|
Post by Ron Rich on May 14, 2019 20:55:21 GMT
Hi Juju,
( I used to know a guy named "Juju"--have you ever lived in the SF area) ?
Are you sure the pot's not there ?? The pot on that unit was attached to the rear wall with a 12 position Molex Plug-- You would need to obtain the service manual for all of the wires-- but look carefully, if a motor is attached, the volume control is there--just remove the motor, or purchase a "control head" for it. Ron Rich
|
|
|
|
Post by andylevine on May 14, 2019 21:15:05 GMT
juju504 - heres a few from my STD4 let me know if they are OK Attachments:
|
|
|
|
Post by juju504 on May 15, 2019 1:21:44 GMT
Hi Juju, ( I used to know a guy named "Juju"--have you ever lived in the SF area) ? Are you sure the pot's not there ?? The pot on that unit was attached to the rear wall with a 12 position Molex Plug-- You would need to obtain the service manual for all of the wires-- but look carefully, if a motor is attached, the volume control is there--just remove the motor, or purchase a "control head" for it. Ron Rich Lol no, I've never lived in SF. I'm just a woman who loves old jukeboxes and arcades and I love restoring these items. |
|
|
|
Post by juju504 on May 15, 2019 1:29:05 GMT
juju504 - heres a few from my STD4 let me know if they are OK I appreciate the photos. I can't really tell which wires are going to the pot. I have 6 wires that need to be wired to my volume pot. Could you please take a photo of just the wires on the side of the pot if possible? I appreciate it. |
|
|
|
Post by juju504 on May 15, 2019 1:30:43 GMT
juju504 - heres a few from my STD4 let me know if they are OK It's the right connector. My pot was just missing and the wires rerouted to somewhere else. |
|
|
|
Post by Ron Rich on May 15, 2019 2:39:22 GMT
JuJu,
I think, Y=you have purchased the wrong pot--the SHP requires a minimum of eight connectors on the pot--check our FAQ's for a supplier that can sell you the correct repro, or one who has the whole VC assembly for sale. Ron Rich
|
|
|
|
Post by andylevine on May 15, 2019 17:58:52 GMT
juju504 - try these.... ill get some tools to the box so I can disconnect the harness later to give you a better look at left side Attachments:
|
|
|
|
Post by juju504 on May 15, 2019 18:27:10 GMT
JuJu, I think, Y=you have purchased the wrong pot--the SHP requires a minimum of eight connectors on the pot--check our FAQ's for a supplier that can sell you the correct repro, or one who has the whole VC assembly for sale. Ron Rich I guess I did buy the wrong pot. Mine only has 6 connectors. I appreciate all the help. I will check the FAQ and find a proper supplier. Thanks for the help this forum is awesome I'm glad I found it! |
|
|
|
Post by juju504 on May 15, 2019 19:06:09 GMT
juju504 - try these.... ill get some tools to the box so I can disconnect the harness later to give you a better look at left side I appreciate it, but please don't pull the pot. I found out I ordered the wrong pot. |
|
