Extra pieces after Select-o-matic base reassembly

[ryanwi]

Hello, these little washers /spacers showed up on my work bench as I began cleaning and reassembling the the popularity meter, Tormat, record rack, and aluminum base. Any idea where they came from? 2 of them, no spur marks from lock washers, slight counter sink to one side. I took a bunch of pictures as I was disassembling, can't find their home anywhere. The exploded views I have found seem to be more of the 1950's units and don't match the in the area these came from.
Oh, and what should I lube the Tormat contacts and the other bar of contacts (selection playing light contacts?) With? Dialectic tune up grease?
Thanks!
Ryan
Seeburg SPS2
Racine, WI USA

[Ron Rich]

Hi Ryan,
Welcome !
Unfortunately, them thar "little washers", is used "all over the place" on that mechanism ( and cabinet too !) to take up "slop". No telling where you may have dis-lodged one or more from ?? NO "lubrication", was factory recommended, nor used, on the TMU, or light bar. Ron Rich

[jukeboxmarty]

These seem to be the spacers that go in between the rack uprights and the brackets as show in the picture. One goes on each side of the rack.

[ryanwi]

That was it! Thank you so much!