|
|
Post by kmkilroy8 on Aug 21, 2019 23:06:18 GMT
I have a rowe r82 woodhue, It was working just fine then out of nowhere the reset and select light keeps flashing and will not let me select a record, I've cleaned all the buttons and reseated all the connections but no luck, I can get it to clear sometimes but it comes right back on. Any ideas?
Thank you in advance!
Kk
|
|
|
|
Post by Ron Rich on Aug 22, 2019 0:50:41 GMT
Hi KK,
Power supply ?? How did you "clean connectors" ?
Ron Rich
|
|
|
|
Post by kmkilroy8 on Aug 22, 2019 1:26:14 GMT
I blew out the button control box with air as I didn't see a way take it apart safely. The power supply isn't fluctuating on my meter. if I put it on continuous play it will play random selections. Seems to be an issue with the buttons like some are stuck on.
|
|
|
|
Post by Ron Rich on Aug 22, 2019 2:37:29 GMT
KK,
Does this model use the gray colored buttons, on a PCB ? If so you can dis-assemble each button, and clean them if need be--You can also check each button for continuity with your meter--Power OFF ! when doing so-- Also "air" won't clean contacts-- Read the sticky in our FAQs section on contact cleaning, and read the above sticky post here in this section on common problems.
|
|
