|
|
Post by drsfire on Sept 6, 2019 22:53:05 GMT
I have a 490 that the display appears to work properly except when you enter a selection it goes away after a couple seconds and nothing happens. If you manual move arm out of position and turn on the juke box the motors will return to the rest position. I am unable to get a wiring diagram for this model I have the schematics for the 490-1 but this is a little different.
|
|
|
|
Post by Ron Rich on Sept 6, 2019 23:01:29 GMT
Did you check the suppliers listed in our FAQ's section for a correct schematic ? I don't think there is too much difference between those models ?? Ron Rich
|
|
|
|
Post by drsfire on Sept 6, 2019 23:20:32 GMT
Yes, i find the display and the cpu have differences and i have checked with the suppliers
|
|
|
|
Post by Ron Rich on Sept 7, 2019 2:36:46 GMT
David,
Try posting a "wanted" in our parts wanted section--hopefully someone will see it ?? Ron Rich
|
|
|
|
Post by rockola490 on Dec 31, 2019 3:00:56 GMT
|
|
|
|
Post by jukenorman on Jan 8, 2020 20:22:37 GMT
Hi Ted, Easy! There's a DIP switch set to the wrong position. If you look through previous posts (good place to start!), you will find a reference to this! Oops, just answered a post that's vanished! EDIT--Post was a "hack"-- removed because of hacking--
Just delete this post as well Ron, save confusion!
|
|
