scudie
Junior Member
Posts: 88
|
Post by scudie on Dec 24, 2019 15:37:02 GMT
My 2100 has recently started to Not replace some of the the records automatically after it has finished playing, it keeps spinning the record even though the stylus has followed the run off groove towards the centre, the records in question have been played many times so I presume it's not the record that is at fault, if I press the reject button it stops the record and replace's the record as it should. Any suggestions anything that I can clean / lubricate ?
Merry Christmas
Paul
|
|
scudie
Junior Member
Posts: 88
|
Post by scudie on Dec 24, 2019 16:12:25 GMT
Thought I would have a look at it and after removing the top arch trim I could see a small switch that is activated by a mechanical arm linked to the tone arm, slight adjustment to the switch has cured the fault. So far!
Am guessing that it will get a fair amount of play over the holidays so I will know for sure by 2020.
Cheers Paul
|
|
|
|
Post by Ron Rich on Dec 24, 2019 17:41:33 GMT
Hi Paul,
If you needed to "adjust" the end of record, trip switch, after it has been working for many years--try to find a replacement, as it's on it way "out" ! Only other "solution" I know of is to remove the switch --VERY carefully, "pry it open" and "clean" the contacts-- --- Ron Rich
|
|
scudie
Junior Member
Posts: 88
|
Post by scudie on Dec 24, 2019 17:55:19 GMT
Cheers Ron
I will have a chat with the guy I bought the Jukebox from after the Christmas break. He may have a replacement switch.
Cheers Paul
|
|
|
|
Post by Ron Rich on Dec 24, 2019 18:11:28 GMT
Good luck, Paul,
None ave been available on this side of the pond in at least 40 years-- Might find a junker with the newer type switch & bracket----it can be interchanged, and replacements are still available for it -- Ron Rich
|
|
