|
|
Post by henrym56 on Jan 23, 2020 2:04:50 GMT
When loading a record onto the platter, my jukebox rotated the gripper arm far past the set down point. The arm is now totally jammed and I am at a loss about what to do. I have applied a fair amount of pressure in an attempt to un-jam it. I have attached some pictures showing this. This happened soon after replacing the pin-block assembly. The platter is off in these pictures. Attachments:
|
|
|
|
Post by drewgwhite on Oct 15, 2020 20:42:34 GMT
Henry, were you able to find a fix for this? I just picked up this same model today and mine has the same issue. I can see what the issue is. As far as the fix, no clue...
|
|
|
|
Post by Ron Rich on Oct 15, 2020 22:49:17 GMT
Did you read the above "red pinned sticky" on "grippers" ? I would oil the gripper as stated above-- and attempt to turn the gripper motor in reverse to get the bow in an upward position as described in the sticky. Ron Rich
|
|
