|
|
Post by toberlindacher on Feb 3, 2020 15:50:57 GMT
2150 motor won't move forward after I disassembled it to replace a letter coil. The reverse function works properly when I press in the reverse switch but nothing from the forward switch. Any ideas?
|
|
|
|
Post by Ron Rich on Feb 3, 2020 17:10:30 GMT
Well, no-- Which "motor" ? What are you calling the "forward switch" -- Please read the "Hi Newbies" post in the FAQ's section--- Ron Rich
|
|
|
|
Post by toberlindacher on Feb 3, 2020 23:58:32 GMT
Nevermind. I found the issue. A broken solder joint in the Amp going to the bridge rectifier that I replaced. Doh!
I was originally speaking about the motor on the selector unit that moves the wobble plate and hits the reversing switch. After re-reading my post I realize how vague it was. Damn newbies...
|
|
|
|
Post by Ron Rich on Feb 4, 2020 3:39:45 GMT
Glad you found it ! Ron Rich
|
|
