Post by Ron Rich on Feb 3, 2020 21:21:32 GMT
Hi All,
On the SAU models (B thru JL) if they were moved without proper tie down procedures observed, and now re-play the same record(s) over and over, WITHOUT- scanning, most likely the "frog" has jumped out of it's holder. Open the rear and l@k-- Bakelite should be contained at least halfway up, on both sides by the metal "upside-down U shaped" spring loaded, enclosure. Ron Rich
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
On ALL models from the B on up, check the trouble shooting guide published by Seeburg -- warped records, miss-aligned "frogs" something "stuck" in the record separators, "stuck" Safety Plunger assembly. Stuck "reject switch", either on the rear of cabinet, or the one on tone arm, or on models so equipped, the "remote", the service switch, or auto-reject PCB (SMC models only), and models equipped with a clamp arm, reject switch--on all models: a miss-adjusted, end of record switch.
Tormat units-- open on the TMU ring wires-- or on all models from the LPC's thru the STD's -- an open relay hold circuit reset, wire thru the plug. Ron Rich