|
|
Post by cinder13812 on Mar 9, 2020 1:17:20 GMT
I just bought a NSM Performer Wall jukebox. The left channel is not working. The 2 boards running the transformer both have a red LED lite up. I swapped wires and speakers. If I crank it up full volume it’s will start to crack a bit. Right side works perfect.
Thoughts??
Help please.
|
|
|
|
Post by jukenorman on Mar 9, 2020 18:02:55 GMT
Have you done the simple check that the left channel hasn't been turned down in the programming, setting P053?
Norman.
|
|
|
|
Post by cinder13812 on Mar 9, 2020 22:05:15 GMT
Thank you! I will check. I’m very new to this. Could you run through how to get to that settling?
|
|
|
|
Post by jukenorman on Mar 10, 2020 9:39:15 GMT
Do you have a manual? If not you can find one that will be good enough for programming checks here nsmjukeboxmanuals.yolasite.com/manuals.phpPage 303 onwards. If you need to do any checks utilising schematics, you will need a better copy - check jukebox-world.de Norman.
Edit - I have posted the above info in FAQs.
|
|
|
|
Post by Ron Rich on Mar 10, 2020 16:33:15 GMT
Hi Norman,
Please post this type info in the FAQ's section and then, if not seen, refer to it when informing "Newbies"--
Thanks, Ron Rich, Board Monitor
|
|
|
|
Post by cinder13812 on Mar 11, 2020 0:34:51 GMT
I did download manual. I’ll check that out. If that is turned up could something be burnt out?
Thank you.
|
|
|
|
Post by Ron Rich on Mar 11, 2020 2:31:31 GMT
yes-- something could be "burnt out" ! Ron Rich
|
|
|
|
Post by cinder13812 on Mar 14, 2020 2:45:03 GMT
Oh thank you Ron Rich for the Specifics.  I figured it out. Thank you. |
|
|
|
Post by Ron Rich on Mar 14, 2020 3:35:34 GMT
Hi There,
I did not supply an "facts" -- juke
Norman did -- That's why we ask that posts be signed ! Ron Rich
|
|
I figured it out. Thank you.