|
|
Post by gciezki on Apr 13, 2020 21:40:30 GMT
Hi
I Have a Wurlitzer 2400. I recently had the amp rebuilt and all was working well. After playing for a while the "select" buttons no longer work. You push the letter and nothing. Also the select button doesn't light up either. I really don't know anything about these. Could it be a fuse?
Any ideas what is wrong and what needs to be replaced?
Any ideas would be greatly appreciated.
Thanks |
|
|
|
Post by Ron Rich on Apr 14, 2020 3:30:32 GMT
Yep-- Could well be a "fuse"-- If it has a "playrac" in it, you will see the fuse right on the front of it--check size and type--do not replace with a larger size fuse ! -- are you using coins in this phono to play it ? Ron Rich
|
|
|
|
Post by gciezki on Apr 14, 2020 14:32:05 GMT
no the coin option was turned off. We inherited it from my father in law. Hard time finding someone to repair it in Wisconsin!
Thanks so much for the info. Where would the fuse be located?
|
|
|
|
Post by Ron Rich on Apr 14, 2020 16:35:09 GMT
Please READ, the "Hi Newbies" and the "How a jukebox works" posts in our FAQ's Section--
There is NO, "coin option". Therefor, if someone has "set that phono on free play", the fuse I was speaking of can be removed, as it's not being used. Do you have the Service Manual ? Ron Rich
|
|
|
|
Post by gciezki on Apr 23, 2020 15:20:17 GMT
I will go to the FAQ sections and read up.
No I don't have a service manual. Do you know where I might be able to find one?
That would probably be helpful in the future. |
|
|
|
Post by Ron Rich on Apr 23, 2020 16:38:40 GMT
It would be helpful to you to read the PM sent to you-- ! Ron Rich
|
|
|
|
Post by gciezki on Oct 30, 2020 1:03:33 GMT
Any ideas what could be the issue? Just paid a lot of money to get the amp rebuilt. Nothing happens when I push the select buttons.
|
|
