|
|
Post by powerup on Apr 14, 2020 18:23:33 GMT
Hey all, not real familiar with these OMT boxes. The carousel stops at the correct place but the grabber fails to move. Can someone point me in the right direction ?
Thanks in advance.
|
|
|
|
Post by Ron Rich on Apr 14, 2020 18:52:07 GMT
Hey ! Gottem da Service manual ? Test procedure is right there-- could be the motor, or the relay that controls it-- what year is this one ? Early motors were "sealed", inside a can, and tended to run out of oil-- They CAN be fixed, by VERY,CAREFULLY cutting the can at the seam- and filling the oil wicks with 20 wt. ND oil ! Later ones have open able cans, and also can be oiled -- Ron Rich
|
|
