Wurlitzer 3800 only plays same record

[knyli57]

 After checking all  micro switches and checking and making adjustment as per the service manual I am back to square one again with my Wurlitzer 3800.

Upon turning on unit the record spins and plays and once it reaches the end of record arm picks up record places in carousel ,drops it,  and then once again picks up same record only to play it again and again and again. 

Putting quarters into slot used to light up select light ,now it does not. Even when the select light did activate when selector buttons were pressed no other light would light up and also buttons would never stay depressed
Should my focus be maybe a circuit board problem or possibly  a program card problem?

The troubleshooting guide multiple times talks about checking the sequence of operation of which there apparently is not one as per reading earlier posts. 

Any guidance would be greatly appreciated

Kevin

[Ron Rich]

Hi Kevin,
Were I looking at that problem, I would suspect the read out switch is defective, or "hung-up" on the "pin" for that record. Have you metered the RO switches ? As for the credit problem-- do you have a BO/AC in that phonograph--if so, which one ? Ron Rich

[knyli57]

Ron,
I have a BO/Ac model #559
I have also checked the RO switches and they appear to be working correctly. I also tryed with a fee play jumper in place and I dont get any selector lights light up when depressed, does exactly same thing.

Kevin

[Ron Rich]

We,, next guess "fuse,or cb "? (no 25vac ?) Ron Rich