|
|
Post by denniso on Jul 23, 2017 11:57:40 GMT
Hi Ron
I loosened the allen screws on the micro switch cam. How do i return the cam to the proper adjustment?
Dennis
|
|
|
|
Post by Ron Rich on Jul 23, 2017 13:27:00 GMT
Hi Dennis,
If that's not covered in the Service Manual, I have no idea ? Did you test the Micro Switches as outlined above, with an analog, not digital, meter ? Ron Rich
|
|
|
|
Post by denniso on Jul 25, 2017 0:09:13 GMT
Hi Ron, is there a way to properly adjust the cam that the micro switches are on, i think someone adjusted it before me. thanks
|
|
|
|
Post by Ron Rich on Jul 25, 2017 3:15:25 GMT
Like I said afore--iffin it ain't in the Service Manual--I dono it !
|
|
|
|
Post by jukerocks on Aug 1, 2017 12:34:59 GMT
When the gripper notch is fully retracted with the bow over the magazine, the roller on #1 Micro should be in the cam notch. That should be in your manual but not overly explained. Further check for correct position when it's fully retracted with the bow over the turntable: the #3 Micro roller will be notched.
It's important to test Micros only with an analog tester, and make sure each contact is clean and secure. Deoxit is an excellent product to apply to these connections. Patrick
|
|
