|
|
Post by krogers on Sept 4, 2020 20:14:00 GMT
My Wurlitzer 3600 does not add credits. I bypassed the bo/ac by connecting 2,6,and 7. There was no pin in port 8. If I click the set up relay I can get a single play. After a song is selected it plays, and the single select goes away. Advice on how to keep the selection open? Additional info is that the clear switch and free play switch do not appear to do anything; and spring is broke on free play switch. Hopefully the video is helpful. Thanks!
|
|
|
|
Post by Ron Rich on Sept 5, 2020 2:54:47 GMT
Two questions,
1.Do you have the schematic ? If so look at the BO/AC plug and determine which pin goes to the set-up relay coil. That pin to ground, should energize that relay-- the other pin to ground should light the select lamp.
2. How were you able to post the above video ?
Thanks, Ron Rich
|
|
|
|
Post by krogers on Sept 8, 2020 0:58:46 GMT
Thanks for the quick reply Ron. I hope you had a good holiday.
When I created the post there were options for attachments. The video itself was too large, so I created a YouTube account and posted the video to it. There was a different option to post a url link to a video, and when I did that it posted the video right in the message.
I have pictures of the schematics to share, but don’t see the same options for attachments now that I am “replying” to the thread. I’ll see if I can figure it out, otherwise I will have to start a new thread to share the diagram pics.
|
|
|
|
Post by Ron Rich on Sept 8, 2020 2:50:42 GMT
Should you figure out how to post it--PL/ease post that info in the FAQ's section concerning this ! Thanks Ron Rich
|
|
