andym
New Member
Posts: 2 
|
Post by andym on Sept 23, 2020 7:58:50 GMT
Hi. My 2500 has an issue. When selecting a record a pin fires but nothing further happens. If I try to select a second record the 2amp fuse on the power supply blows. Unable to find anything jammed. Any ideas where to look ?
|
|
|
|
Post by Ron Rich on Sept 23, 2020 12:17:29 GMT
Hi Andy,
Are you sure that you have the timing of exactly when the fuse blows correct ? I suspect it may be blowing when a pin is released, and if so, look at the mute/pay and transfer switches for a broken leaf. Ron Rich
|
|
