|
|
Post by actman on Dec 25, 2020 12:46:10 GMT
I recently moved my jukebox to a new condo. Upon unpacking it and turning it on it will not work. It powers on and flashes Po44er 31
Credits remain at 0. It had been programmed previously to free play.
When I pull out the switch for program mode I was able once to enter but now I can’t. It also glitched once as I tried to program and it picked up a disc and played a song. So I know the cd and mechanics are working. I pushed a red reset switch on the board but nothing. I have looked up the error code in the manual but it points to some light show option .Any ideas on this would be helpful.
|
|
|
|
Post by Ron Rich on Dec 25, 2020 13:27:56 GMT
First off-- Whatz an "Old Fashion Wizard" ? 2nd. just a guess-- try removing/replacing the battery ?? Ron Rich
|
|
|
|
Post by jukenorman on Dec 26, 2020 10:33:09 GMT
Hi Actman,
It's telling you that there's an invalid entry at program location 44. I only work on these when cornered so I have little experience, but the programming switch is normally open so it would be worth checking that the plug at the CCU is seated OK and even that the switch itself is functional - for starters.
Ron, an Old Fashion Wizard is an ESV wall mounted CD jukebox - same as when you asked 3 months ago LOL!
Norman.
|
|
|
|
Post by Ron Rich on Dec 26, 2020 13:21:29 GMT
Norm,
Yep-- I knowed it waz a wall mount CD, but what I dono, is what is the ES number ! Ron Rich
|
|
|
|
Post by jukenorman on Dec 26, 2020 20:13:24 GMT
Ron, I knew that but I found it amusing just the same - sorry!
Norman.
|
|
|
|
Post by Ron Rich on Dec 26, 2020 23:12:15 GMT
Hi Norman,
I knew you knew that, and this was a feeble attempt at being "funny"-- LOL-- I still don't know which system it used ? Ron Rich
|
|
|
|
Post by actman on Dec 27, 2020 13:55:03 GMT
Hi Actman, It's telling you that there's an invalid entry at program location 44. I only work on these when cornered so I have little experience, but the programming switch is normally open so it would be worth checking that the plug at the CCU is seated OK and even that the switch itself is functional - for starters. Ron, an Old Fashion Wizard is an ESV wall mounted CD jukebox - same as when you asked 3 months ago LOL! Norman. I have checked the switch as well as all connections on the main board |
|
|
|
Post by jukenorman on Dec 27, 2020 14:30:39 GMT
In that case I would suspect the RAM battery as Ron suggested.
Norman.
|
|
|
|
Post by actman on Dec 28, 2020 23:07:00 GMT
In that case I would suspect the RAM battery as Ron suggested. Norman. Would a dead or low battery prevent me from programming the jukebox? I know it would prevent program settings to be saved. |
|
|
|
Post by Ron Rich on Dec 28, 2020 23:12:18 GMT
It can cause all "kinds of things" to happen ! It's ALWAYS the 1st suspect when strange things happen ! Ron Rich
|
|
|
|
Post by jukenorman on Dec 29, 2020 9:40:07 GMT
Well we know that the program settings haven't been saved because in your original post, you told us that the credits were showing zero - so the battery is definitely suspect. We also know that you have spurious enties in some program settings. The RAM battery would be the next obvious step, I would suggest.
Norman.
|
|
