Post by mb9513 on Nov 1, 2017 3:10:15 GMT
Hi all: working on an amp for 100f cd unit. it was blowing fuses on driver boards so I replaced the Darlington driver transistors in both channels. that went ok. the problem is that this was done on site and I had the amp out for a while before I could make arrangements to get back to the client. this amp has an auxiliary board attached over the top of the amp. it looks like it was to integrate backround music, microphone, and pa usage. I cannot see anywhere "CD input". I have never seen one like it and it is not in the manual. I tried a couple of guesses as to where the RCA lines from the player connect, no go. it would be great if anyone has worked with this ad on board and can tell me what connections I need to get this box back working again. thanks in advance Mark
