Wurlitzer 2150

[todd]

Hello

Working on a Wurlitzer 1250, recapping and checking resistors. In the Junction box and stepper unit, there is a capacitor I would like if someone could tell me what to use to swap it out. Its item #9 a 65-93mfd 50v on page 16 Fig. 34 of the manual. At first I thought it was an electrolytic but do not see polarity marked on it or the schematic. On the cap itself its marked 65-93mfd 50vac, it is connected to the selector motor.
Any info appreciated.
Thanks
Todd

[Ron Rich]

Hi Todd,
It's an "AC cap"--non pol-- and probably OK if the motor runs---if not, it is available from one or more of the suppliers listed in our FAQ's section. Ron Rich

[todd]

Hi Ron
Thank you for the info.