|
|
Post by lovatomi on Jul 5, 2021 2:32:45 GMT
Hello all. Pretty new to jukeboxes and I have gotten to my first conundrum. Happy to have this forum as a resource. I've been cleaning up the selector bank assemblies and was trying to strip a wire so i could reattach it and managed to pull it from the little magnet assembly. Is there any chance of fixing this? See photo. Thanks!  2021-07-04_09-29-10 by Michael Lovato, on Flickr |
|
|
|
Post by Ron Rich on Jul 5, 2021 3:23:11 GMT
A chance--yep-- a "good chance"-- ?? Ron Rich
|
|
|
|
Post by lovatomi on Jul 5, 2021 14:18:56 GMT
Ha. Thanks Ron. Anyone know what the technique would be?
|
|
|
|
Post by Ron Rich on Jul 5, 2021 15:53:03 GMT
Hi Mike,
What I would try-- Very carefully attempt to remove the paper wrap from the coil, & hope you could see the broken wire-- if so, using a length of "PC board, Teflon repair wire" to splice onto it-- bring it out to terminal strip and connect the broken end there-- Ron Rich
|
|
|
|
Post by lovatomi on Jul 5, 2021 17:33:28 GMT
Okee doke! I'll give it a try. Thanks for the assistance
|
|
