keats
New Member
Posts: 3
|
Post by keats on Aug 12, 2021 19:03:30 GMT
12 Aug 21
Rowe Ami CD-100-G "Laser Star" VI. Print Reference "Juke Box Manuals.Com" Section 6-12. Title Page Assembly Adjustments. For some reason the title pages are not functioning as they should. If I press one of the buttons to move the pages up or down, sometimes they work, but more often it will flip more than one page with a single brief button push. Sometimes it will not flip the last page down to reveal the available music choices on the top title page.
I can rotate the Title Page "Knob" under the title page assembly and the pages will flip. So I know that they are not stuck in place. I read the manual and it tells me to remove the title page assembly, turn it on end Remove a cover and the light block cover and readjust the crank. What I'd like to see is a video or even photos of this repair before I try it. The diagrams on the manual are good but they are not photos, just drawings. They show a cam on the motor end but there are no drawings for the non motor end. Has anyone ever done this repair and if so, are there videos or photos available to show what I'm getting into? Any help will be greatly appreciated. Especially photos or a video or a link to either of them. Thanks, Keats Arizona.
|
|
|
Post by Ron Rich on Aug 12, 2021 19:57:18 GMT
Keats, Prior to doing anything-- which version "chip" is in your CCC ? Have you "re-booted" (defaulted) that CCC ? Have you oiled the page motor ? Ron Rich
|
|
keats
New Member
Posts: 3
|
Post by keats on Aug 14, 2021 18:48:44 GMT
8/14/21 Not sure of chip version. I believe it's a;
Zilog Z9018008PSC Z190 NPU 8929 Il
Large chip next to the battery.
Changed out the coin battery. Much better voltage now.
Prior owner used grease on title page mechanism. Very sticky. I got it all cleaned off. (No Lube Needed per manual) Very smooth after I adjusted the shaft and drive gear. Not as hard as I thought it would be.
Thanks for the reply..
Keats Arizona
|
|
|
Post by Ron Rich on Aug 14, 2021 18:59:48 GMT
Hi Keats, o you have the manual-- read it to find the chip # --Grease ?? Yuk !! Ron Rich
|
|