|
|
Post by thomast on Oct 22, 2021 18:35:01 GMT
I just moved the jukebox into my building, plugged it up and the control board and keyboard don't work. This unit has been played maybe 2 hrs. since it was bought. I've checked all fuses and looked for any wires and harnesses that may have come loose but all is good. It was inherited and has been unplugged for maybe 15 yrs. Does anyone know what I need to check.
|
|
|
|
Post by Ron Rich on Oct 22, 2021 18:50:47 GMT
Since I dono that model's internals-- I can only generalize, and give you my opinion--hopefully someone else knows more---
FIRST thing I would do is remove the CCU, and check if there is a corroded battery in it ? If corroded, remove it--and hopefully wash the board with 91% rubbin'al-key-haul- Do this OUTSIDE as fumes are bad ! Dry totally, prior to installing a new battery --or best, IMHO, extend the wires from the battery, and mount the battery to the outside of the CCU.
Next, after re-installing the CCU, see if the power supply is sending out the correct voltages ( didja read the "HI Newbies" post in our FAQ/s section as asked in a PM ?)-- I think, that's where your problem lies--
Ron Rich
|
|
|
|
Post by thomast on Oct 22, 2021 19:58:08 GMT
Thanks...I will check that out,
|
|
