Post by retrophono on Dec 22, 2021 14:23:53 GMT
After initial refurb & adjustments, the jukebox played reliably for several selections & on and off cycles.
I've made the adjustments as per manual for the linkage --- , the 'clutch' portion of the drive gear retracts as soon as power is cut to the transfer motor, yet when the record trips off, I can clearly see the clutch disengage but the motor manages to coast long enough to have the carousel stop about four or five records on, transfer and get this, if no record is in the slot, trips immediately, ( I haven't troubleshot this issue yet...), and then the same cycle repeats itself until I manually stop the gripper, so that the transfer linkage is parallel as per spec.
Thanks in advance for your input.
Cheers, Steve
** UPDATE ** I've corrected the fault, cam switch #3 was being activated to late, adjusted and tested thoroughly, all good now!!
I've made the adjustments as per manual for the linkage --- , the 'clutch' portion of the drive gear retracts as soon as power is cut to the transfer motor, yet when the record trips off, I can clearly see the clutch disengage but the motor manages to coast long enough to have the carousel stop about four or five records on, transfer and get this, if no record is in the slot, trips immediately, ( I haven't troubleshot this issue yet...), and then the same cycle repeats itself until I manually stop the gripper, so that the transfer linkage is parallel as per spec.
Thanks in advance for your input.
Cheers, Steve
** UPDATE ** I've corrected the fault, cam switch #3 was being activated to late, adjusted and tested thoroughly, all good now!!