|
|
Post by carlos48 on Jan 2, 2022 14:44:17 GMT
hello everyone, I have found several problems when restoring the harting m100k. One of the problem is the carrousel doesn,t stop after selection is done. even the turning switch is off and there no electricity power on it... it might be a short somewhere.  any clue, please? |
|
|
|
Post by Ron Rich on Jan 2, 2022 14:56:35 GMT
Hi Carlos,
IF, it's moving withOUT power, you have a new invention!-- I have never seen that jukebox, but most other brands use one of two systems to run the basket. 1. A sliding contact on the "pinbank" that energizes a "play control relay" to power the motor. 2. A scan control assembly, which has a "home switch" of some nature-- look for these on your phono, and schematic. Ron Rich
|
|
|
|
Post by carlos48 on Jan 2, 2022 15:40:43 GMT
it has two switch for running and stoping the carrousel, one is a automatic with a solenoid for starting running,,, thats seems to work right but the carousel doesn’t stop… even the contact are not connected. the other one is manual, a switch manual, and when i press it, it stops, but then don’t make the selection again when switch off… the machine looks like is sometimes out of control… out of syncronism… I,m going to try to solve by investigating, this is a shame, because i could rebuild other parts, and now more problems cames, but have to carry on…. ibb.co/10wWwsLibb.co/rkGNqGN |
|
|
|
Post by carlos48 on Jan 2, 2022 22:01:05 GMT
I already fixed the problem... sorry for my jukebox knowledges.... the manual switch cancel the automatic switch... so I turn the manual off...and I only worked with the automatic switch... I believed it was in short but the thing was the manual switch was cancelling all the automatic controls.
What happened was, it didn,t make contact the switch pins at the edges in "on position"... just cleaned and fixed the wires which they were a bit loose,,,, now it seems to works again properly
|
|
