|
Post by mrpotstickers on Jan 7, 2022 15:24:41 GMT
i have several issues and looking for guidance
1. where do you find replacement ballast? the front ballast went up is smoke as is looks like the wires frayed at the housing of the ballast.
2. the button panel does shock me. with a meter i am reading 28 Vac. what should i look for
3. on the magazine track where the arm rides on the inner track or outer track what is the best way to take this apart and clean and re lubricate it.as it wont move to the other track it tries but it seems the cam is sticky
thanks in advance for you help and guidance
|
|
|
Post by Ron Rich on Jan 7, 2022 19:10:13 GMT
Since you did not do as "requested", in a PM to you, I can't answer the first question ! On the 2nd question-- start "UN-plugging" things till you no longer have that voltage ! ( coodbe that burnt ballast !) On the third question-- I can usually get that cam follower free, and working well with the addition of 20 wt. ND oil-- unless someone has added some "grease" that does not mix with the oil-- then you start "un-screwin'". Ron Rich
|
|