|
|
Post by paradisecs on Jan 7, 2018 21:31:19 GMT
What rating toggle switch would you recommend for replacing a bad power toggle on the LS series? 15 amp 125v SPST?
|
|
|
|
Post by Ron Rich on Jan 8, 2018 0:13:23 GMT
I believe it is marked on the switch--but that should be OK. If the switch is failing to "flip", try the following: With the wall plug un-pluged,find a dowel, or small withed piece of wood, about one foot long--place it against the bat handle, and give it a wack or two with a hammer--careful--don't "bottom the switch"--what you want to do is "snap" not destroy the switch. Good luck, Ron Rich
|
|
