|
|
Post by dewser11 on Jan 12, 2018 19:19:56 GMT
I picked up this jukebox which he said was in working order except for the spindle kept going.when I got it home I turned it on and I get lights but nothing on the selection boards.I put it in service mode and tried that but still nothing.Any suggestions
I am getting some power to the turntable
|
|
|
|
Post by Ron Rich on Jan 13, 2018 0:43:54 GMT
Please, read the info on the sign-in page, and "Hi Newbies" in the FAQ's--after that, please refresh my great, but not too long memory--
Does the R-86 use Consolidated Control Center (CCC), or individual computer modules ? When you say you are "-- getting SOME power",
what's that mean ? Where is your gripper arm ? Do you have a full basket of records in it ? Are the three LED's on the power supply lit ? Ron Rich
|
|
|
|
Post by dewser11 on Jan 17, 2018 15:48:22 GMT
it has the ccc board.the arm is in the basket.The basket has one record in it.3 leds are lit.Thelights come on,the record player has power but no led s on the selection board
|
|
|
|
Post by Ron Rich on Jan 17, 2018 17:11:04 GMT
What are you calling the "selection board" ? Ron Rich
|
|
