Post by e093116 on Mar 4, 2022 14:43:11 GMT
Hi,
I am finishing up a Continental 2 and am wondering where the two black/white ground wires and the green ground wire attach? They were disconnected when I purchased the phono (along with just about every other wire with a spade lug on the end).
One of the black/white wires is connected to the front RH corner of the mechanism base, just below the tonearm wiring connector.
The other black/white wire is connected to the ballast mounting plate, which is located on the back side of the phono behind the record basket.
For the heavier gauge green wire that goes up to the connector for the title strip display, I believe this connects under one of the screws that mount the amplifier?
Thanks in advance for the help...hoping someone can comment where "the factory" terminated these wires.
Bill
I am finishing up a Continental 2 and am wondering where the two black/white ground wires and the green ground wire attach? They were disconnected when I purchased the phono (along with just about every other wire with a spade lug on the end).
One of the black/white wires is connected to the front RH corner of the mechanism base, just below the tonearm wiring connector.
The other black/white wire is connected to the ballast mounting plate, which is located on the back side of the phono behind the record basket.
For the heavier gauge green wire that goes up to the connector for the title strip display, I believe this connects under one of the screws that mount the amplifier?
Thanks in advance for the help...hoping someone can comment where "the factory" terminated these wires.
Bill
