|
|
Post by juke0012 on Apr 1, 2022 20:31:19 GMT
I hope this is the area that one places a question. I’m really having issues posting a question. I’m sure it’s me. Anyway here goes. I need a lead on where to get a feeler gauge to make these adjustments. The gauge should include the following thicknesses: 1/16, 1/64, 1/32, 3/64. The feeler gauge I have is for automotive use and doesn’t have the ones I need. Any help would be appreciated! Thanks
Bobby Hancox
|
|
|
|
Post by Ron Rich on Apr 1, 2022 23:51:34 GMT
Hi Bobby,
If you had done as requested,in the "users introduction" section stickies,and posted your location in the signature area, I might be able to answer this question better-- how about one of the parts suppliers listed in our FAQ's section--?? And what makes you think you need to "adjust" the gaps? Ron Rich
|
|
|
|
Post by paradisecs on Apr 4, 2022 2:25:25 GMT
I use my automotive ones and just do the math to convert them. I haven't come across ones that actually use fractions, but then I haven't gone looking specifically for them either.
Stephen
|
|
|
|
Post by juke0012 on Apr 24, 2022 18:39:14 GMT
Thanks Stephen, I did what you suggested and used my old car feeler gauge after doing the math to adapt. It turned out great. Thanks again,
Bobby
|
|
