Post by kevwilde on Apr 25, 2022 9:50:25 GMT
Hi,
I was planning on disassembling the motors for the carousel and gripper mechanism to clean them in an ultrasonic bath, but I noticed a label "Re-magentize if disassembled". After some reading I learned that the permanent magnets could lose their magnetic charge if you disassemble them but I could not find out what to do in this situation. How does one go about re-magnetizing these things?
Or maybe more general, any suggestions that I should or definitely should not do when working on these motors?
For reference, they are stock dc 28v motors for a RO 436 (similar to this picture I found on the internet: i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/eEoAAOSw8Jxh3JFB/$_86.JPG)
wkr,
Kevin
I was planning on disassembling the motors for the carousel and gripper mechanism to clean them in an ultrasonic bath, but I noticed a label "Re-magentize if disassembled". After some reading I learned that the permanent magnets could lose their magnetic charge if you disassemble them but I could not find out what to do in this situation. How does one go about re-magnetizing these things?
Or maybe more general, any suggestions that I should or definitely should not do when working on these motors?
For reference, they are stock dc 28v motors for a RO 436 (similar to this picture I found on the internet: i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/eEoAAOSw8Jxh3JFB/$_86.JPG)
wkr,
Kevin
