|
|
Post by normantomlin on May 8, 2022 9:08:11 GMT
Is there any instructions anywhere on how to dismantle the cabinet on an STD4. The chromework is blistered and generally a bit shabby. I thought I'd have a go at using vinyl wrap chrome and that it would be neater to remove the chromed metalwork from the frame first.
Is this an easy task and is there any description of how to go about it anywhere?
thanks
Norman
|
|
|
|
Post by Ron Rich on May 8, 2022 13:02:48 GMT
Hi Norman,
Not really-- all there is is the parts catalog-- basically, just start un-scrwin' -- WATCH type/size/length, of screws--specifically in the area of glass ! Ron Rich
|
|
|
|
Post by normantomlin on May 8, 2022 18:09:46 GMT
Hi Ron,
Thanks for getting neck to me. I guess I'll just take it slowly and take lots of pictures.
Norman
|
|
Mark
New Member
Posts: 33
|
Post by Mark on May 10, 2022 22:09:34 GMT
Advise taking short videos and pics as you go to indicate what goes back where and in what order. The top front has a lot of parts.
|
|
|
|
Post by Ron Rich on May 11, 2022 2:59:20 GMT
Also-- l@ k at your cabinet parts catalog- they were very accurate in those days-- Ron Rich |
|
|
|
Post by normantomlin on May 13, 2022 16:10:26 GMT
Good advice Ron,
Couldn't separate the glass over tiles from its frame, so had to wrap in situ. Managed to completely dismantle top and put it together ok. Cleaned inside of the glass after separating it from coloured background. Looks so much more vibrant now.
Pleased with the results of the chrome wrapping. Not perfect, but much better than before.
Norman
|
|
