|
|
Post by vistec on May 11, 2022 23:35:32 GMT
The output voltage (DC) should be 28 volts. I am reading 56 VDC any suggestions??
|
|
|
|
Post by Ron Rich on May 12, 2022 13:15:47 GMT
YES !! Shut it off !! Verify after un-plugging anything you can, that this is true --- Ron Rich
|
|
|
|
Post by vistec on May 13, 2022 0:01:25 GMT
GOOD NEWS!!! It was just a broken wire....Works and sounds GREAT!!!!
|
|
|
|
Post by Ron Rich on May 13, 2022 0:34:16 GMT
Wire ? where, on what circuit ? Glad you found it- but sure not clear how that can happen ? Ron Rich
|
|
|
|
Post by Marcel Bogert on May 14, 2022 12:09:34 GMT
Check the voltage again to make sure your not having way to much voltage in that circuit.
Without load the voltage can increase but 56 volts DC seems high.
Do not run the machine without checking to prevent damage.
|
|
|
|
Post by Ron Rich on May 14, 2022 12:18:27 GMT
Hi Marcel,
Somehow you missed a couple of "posts" here ?? He found/fixed the problem-- Ron Rich
|
|
