|
|
Post by terry29 on Jun 5, 2022 14:02:28 GMT
Hi all
I have a Rock Ola Starlet and the selection buttons won't engage , I have checked all fuse's that I can see they are all fine.
Any help would be greatly appreciated
Thanks Terry
|
|
|
|
Post by Ron Rich on Jun 5, 2022 14:08:15 GMT
Hi Terry,
Please read the "Hi Newbies" post in our FAQ's section, and give us enough info to help you ! Ron Rich
|
|
|
|
Post by terry29 on Jun 5, 2022 14:37:03 GMT
Thanks Ron Rich
Model is a Starlet 429 that was working fine.
I have had it quite some time
Any help would be great
|
|
|
|
Post by terry29 on Jun 5, 2022 14:37:37 GMT
I am based in Cambridge UK
|
|
|
|
Post by Ron Rich on Jun 5, 2022 14:49:18 GMT
Hi Terry,
I added your nane/location to your profile for you--
On Your phonograph, is it using coins for credit, or has it been jury rigged to play for nothing ? Are credits established, or not ?
"HOW", did you "check fuses"-- are they all the correct size & type ? Ron Rich
|
|
|
|
Post by terry29 on Jun 5, 2022 14:53:59 GMT
Thanks Ron Rich
Coins for credit and selection light is lit
I visually checked fuses all correct size and type
|
|
|
|
Post by Ron Rich on Jun 5, 2022 16:01:52 GMT
Hi Terry,
One can not always tell if a fuse is good without "metering" it-- Do you have a meter ? Do you have the Service manual for it ? What happens (does not happen), as you attempt to make a selection ? Follow the sequence of operation in the manual-- Ron Rich
|
|
|
|
Post by terry29 on Jun 5, 2022 18:21:46 GMT
Thanks Ron Rich
Sequence as follows
Put coin in for credit, selection light lights up, press selected letter which then doesn't stay down/engaged , selection light still on and unable to make selection.
Thanks Terry
|
|
|
|
Post by Ron Rich on Jun 5, 2022 18:38:14 GMT
Hi Terry,
OK-- what is supposed to "hold" the button(s?) down ?
Ron Rich
|
|
|
|
Post by terry29 on Jun 6, 2022 18:12:56 GMT
Ron Rich
Like I said any help would be greatly appreciated
Terry
|
|
|
|
Post by Ron Rich on Jun 6, 2022 23:06:34 GMT
Terry,
I can only speculate-- I do not know which system this model uses-- I do not have the manual/schematic-- do you ? Ron Rich
|
|
|
|
Post by fumosanto on Jul 3, 2024 0:40:47 GMT
Hi everyone, I am experiencing the same issue with my Starlet 429. I can add coins, the selection indicator light activates, but when I attempt the push buttons, they don't select/engage. In other words, the selections never lock. This just started happening today. I made a selection, and there was a "hum". The write in carriage started to move, but never made it to the selection on write in disc. Since then, the selections never lock. Any thoughts? Thanks!! -Mike
|
|
