|
|
Post by patnj92 on Aug 10, 2022 16:48:59 GMT
Hi guys. I was having a good time playing my seeburg hideaway hy100ur last night, making selections via the 3w100 wallbox. After a few hours, out of nowhere, it started playing the wrong selections. Say I played A3, it would choose A1 insead...and so on. I had a similar issue before and the culprit was a bad ground on the rca tormat plug. Does anyone have any suggestions or input? I really appreciate it!
-- Patrick
|
|
|
|
Post by jukenorman on Aug 10, 2022 17:42:44 GMT
Hi Pat,
Yes it's possible that it could be poor grounding, you could search the forum for previous tips on poor grounding. Have you looked at the stepper to see whether the correct number of steps are being made for the selections you are making?
Norman.
|
|
|
|
Post by Seeburger on Aug 10, 2022 20:45:06 GMT
It's not a ground problem. The tormat needs a bit of adjustment.Need to move it a hair to the right if it's playing A3 instead of A1. A quick way is to check the contact block pin at the rear. When in Play position it should be in the middle of the dots.If not loosen the 4 tormat screws and move it to get the pin in the middle.
|
|
|
|
Post by jukeboxmarty on Aug 11, 2022 5:45:09 GMT
I agree with Norman. Since you are using a wallbox, also consider the stepper operation. It could even be a weak 2050 tube.
|
|
