|
|
Post by dazzathejukekid on Nov 12, 2022 21:21:35 GMT
Hello I am re-wiring my cartridge with new tonearm wire, the usual 4 wire combination, I am ok with the wiring of the cartridge but the original phone plug i am not sure of. I would have attached an image of the plug but this site will not let me for some reason, but basically its the original plug. Any guidance would be appreciated. Many thanks Darren ![]() |
|
|
|
Post by jukenorman on Nov 13, 2022 11:40:09 GMT
Hi Darren,
There is info in the FAQs on how to post a picture. It would have helped if you told us what phono cartridge you were using. The S100 amplifier is mono so you would only have needed two cores for your cable. The negative connection on the amplifier phono input socket will be connected to the chassis.
Norman.
|
|
|
|
Post by dazzathejukekid on Nov 13, 2022 13:10:18 GMT
|
|
|
|
Post by dazzathejukekid on Nov 13, 2022 13:18:55 GMT
<a href='https://www.casimages.com/i/Erreur 1.html' target='_blank' title='Mon image'><img src='https://.casimages.com/img/2022/11/13/Erreur 1' border='0' alt='Mon image' /></a>
see if this link works
|
|
|
|
Post by dazzathejukekid on Nov 13, 2022 13:21:08 GMT
<a href='https://www.casimages.com/i/Erreur 1.html' title='Mon image'>Lien vers mon image</a>
|
|
|
|
Post by dazzathejukekid on Nov 13, 2022 13:21:28 GMT
I give up, it doesn't work
|
|
|
|
Post by jukenorman on Nov 13, 2022 18:23:05 GMT
Postimages works for me! The M3D has quite a high output so you would just need to connect the two cartridge channels in parallel.
Norman.
|
|
|
|
Post by dazzathejukekid on Nov 26, 2022 11:57:36 GMT
Thanks Norman, yep worked that out, lovely sounding cartridge
|
|
