Post by albert on Apr 23, 2023 23:51:17 GMT
from plugs 105,205 (CCC and Mech board) and the 9 position Molex plug, the orange wire voltages are really low, 4.8 to 5.4vdc where they should be 8.5vdc. All the other wires test perfectly including the 8.5vdc, 26vdc and 26 vac. Should i try to trace it back to the main power supply. or is it linked to the scan switch. when i switch to scan the record tray mechanism just spins and spins nonstop. Any ideas please. Mech and CCC were repaired and guaranteed by a good shop. Thanka, Al