BAL AMI S100 wire gauge

[dazzathejukekid]

Hello

I will be re-wiring the mechanism/cams etc in this jukebox, just wondered whether there is a definite wire gauge i need , and would silicone wires be ok?

Thanks in advance

Darren

[jukeboxmarty]

Although I am not familiar with this particular model, I can say that most machines use either 20awg or 22awg within their main harnesses. Lighting circuits commonly use 18awg.

As far as silicone, yes that would be OK... But PVC should be just as good.

Maybe someone else can weigh in.

-Marty

[dazzathejukekid]

Thanks Marty, that helps very much

[jukenorman]

Hi Darren,
In Europe, cable is sized by the cross sectional area in millimeteres squared. 0.35 or 0.5 would be adequate for your requirements and are roughly the equivalent of 22 and 20awg.

Norman.

[dazzathejukekid]

Thanks Norman