|
Post by canadian on Mar 7, 2018 1:25:59 GMT
Does anyone have an outside source(mouser, etc) for MNL connectors that rockola jukeboxes used, the 9, 12 or 15 pin. Part numbers would be great.
Thanks
David
|
|
|
Post by Ron Rich on Mar 7, 2018 4:06:52 GMT
David, What's a "MNL connector" ? Gotta photo ? Ron Rich
|
|
|
Post by canadian on Mar 9, 2018 2:22:11 GMT
Ron MNL I believe stands for mate 'nd lock which I thought might be a molex connector. I now think it is or was a T&E connector. The 12 pin measures 1.75 inches by 0.75 inches. The 9 is 0.9 by 0.75 inches. Rockola parts list it as V-7012 and V-2020. It is the ends on a 1769 stepper.
|
|
|
Post by Ron Rich on Mar 9, 2018 3:44:32 GMT
David, Yep--that's an A-MP Mate n Loc connector. A-MP was purchased by Tyco ( now TEC), and still makes that plug. I have a part number somewhere--but you can probably find it faster at Mouser/Digi Key. If not, axk me and I'll search for the numbers-- Ron Rich
|
|
|
Post by canadian on Mar 9, 2018 4:52:22 GMT
Ron If you have the numbers I would sure like them. If have checked both suppliers and cannot find the right one. The 9 and 12 pin numbers. Thanks David
|
|
|
Post by Ron Rich on Mar 9, 2018 17:06:58 GMT
Dave, --And the number is---A1426 Didij Key-15 pin male cap)TEC #1-480324-0//// (15 pin socket) A1427ND (1-480323-0)/// male pins 1420ND---female 1421ND HTH, Ron Rich
|
|
|
Post by canadian on Mar 9, 2018 21:09:48 GMT
Thanks Ron I don't I would have never found them without a part number David
|
|
|
Post by KenTheHack on Sept 5, 2018 11:32:27 GMT
Dave, --And the number is---A1426 Didij Key-15 pin male cap)TEC #1-480324-0//// (15 pin socket) A1427ND (1-480323-0)/// male pins 1420ND---female 1421ND HTH, Ron Rich where can I get. 9 pin male plug (for the mic input V-7013 socket) on my Rockola 456?
|
|
|
Post by Ron Rich on Sept 5, 2018 12:54:33 GMT
If a Mate n Loc, type--the above place should have it ?? Ron Rich
|
|
|
Post by KenTheHack on Sept 6, 2018 3:09:14 GMT
Ron - Thanks much for the come-back. đ Iâm going to solve this (small) puzzle now!
|
|
ken96
New Member
Posts: 1
|
Post by ken96 on Sept 7, 2018 11:01:01 GMT
Ron I must be getting feeble-minded, what is âthe above placeâ? Ken
|
|
|
Post by Ron Rich on Sept 7, 2018 12:55:26 GMT
David, Yep--that's an A-MP Mate n Loc connector. A-MP was purchased by Tyco ( now TEC), and still makes that plug. I have a part number somewhere--but you can probably find it faster at mouser/Digi Key. If not, axk me and I'll search for the numbers-- Ron Rich
|
|
|
Post by Ron Rich on Sept 7, 2018 12:56:10 GMT
-----find it faster at Mouser/Digi Key.
|
|
|
Post by Craig on Sept 19, 2018 12:22:07 GMT
|
|
jukeboxgeek
New Member
Retired Engineer/Project Mgr
Posts: 11
|
Post by jukeboxgeek on Nov 22, 2020 23:31:08 GMT
This may be redundant but here are the DigiKey part numbers I used to buy parts I recently needed to build the 9pin JUMPER Plug for the 9pin âWallBox Receiverâ socket on the Rockola 459 jukebox Power Supply Unit......this would be the JUMPER plug that has to be installed when NOT using Wall Boxes nor a Stepper Unit 1769......without this Jumper you wonât be able to make any record selections from the JB keyboard. DigiKey # A1406-ND - Conn Recept/Cap 9 Pos Mate-N-Lok (M-N-L) DigiKey #A1422-ND - Conn Pin 18-24awg Crimp Tin DigiKey Internet: www.DigiKey.com or call 1-800-344-4539 I can also build these for anyone that needs one .......I was unable find an â Already-Builtâ plug in the US or UK so devided to build one. Hope it helps. Stay Healthy đˇ DigiKey: www.DigiKey.com Call: 1-800-344-4539 Mike N.
|
|