Post by marcol on Aug 10, 2023 4:50:13 GMT
Need some help/advice repairing a W2000.
The record changer motor(4 wire) is not engaging properly. I already have the motor armature rebuild, replaced the brushes and have the right voltage on the motor(around 30volts). But still the motor isn’t spinning.. not even out of the box(connect to the juction box). I can feel as soon as i push a selection pin that the motor wants to run but it doesn’t. I tested the motor on my bench with 24volts and it operates good(jumpered two pins and connect 24dc on the other two of the plug)
I cleaned all the contacts in the box, replaced all fuses with proper amps, checked for wiring issues.. but still no luck
Need some help with this one.
Tnx a million
The record changer motor(4 wire) is not engaging properly. I already have the motor armature rebuild, replaced the brushes and have the right voltage on the motor(around 30volts). But still the motor isn’t spinning.. not even out of the box(connect to the juction box). I can feel as soon as i push a selection pin that the motor wants to run but it doesn’t. I tested the motor on my bench with 24volts and it operates good(jumpered two pins and connect 24dc on the other two of the plug)
I cleaned all the contacts in the box, replaced all fuses with proper amps, checked for wiring issues.. but still no luck
Need some help with this one.
Tnx a million
