|
|
Post by sherlock1 on Nov 10, 2023 13:22:28 GMT
I have just got my jukebox going, the carriage ESIV was slow as was the record drive. I removed cleaned and lubricated it, put it back in and fuses SI201 and SI202 have blown. relaced them, gone again. I have no carriage movement and display is not on. Ideas please?
|
|
|
|
Post by jukenorman on Nov 10, 2023 15:30:25 GMT
Power supply! Get the schematic out - check (change) the capacitor(s) for shorts, same with the bridge rectifier diodes.
Norman.
|
|
|
|
Post by jukeboxmarty on Nov 12, 2023 0:27:01 GMT
This might be too simplistic, but did you remove any plugs or connectors when you worked on the carriage? If you did are you sure they are plugged in correctly?
|
|
